* Added info on focus/ignore/show/hide to legend on graphs

* Made separate function for formatting filters in legend

* Align file names in weblist disassembly

The disassembly displayed by weblist attempts to align file:line
information after each instruction, but two things interfere with this
alignment: 1) the instruction text often has tabs in it, which defeats
the length-based alignment and generally interacts poorly with HTML
rendering and 2) the instruction text often has special HTML
characters like < and > in it, but we pad the string after escaping
it, so the length is again not representative of how it will display.
For example, the following shows what this looks like for disassembly
that contains < and >:

                   .          .   41c634: cmp    $0x200,%rdx                               mgcsweepbuf.go:130
                   .          .   41c63b: jae    41c64f <runtime.(*gcSweepBuf).pop+0x4f> mgcsweepbuf.go:130
                   .          .   41c63d: mov    (%rax,%rdx,8),%rcx                        mgcsweepbuf.go:130
                   .          .   41c64f: callq  424800 <runtime.panicindex>             mgcsweepbuf.go:130
                   .          .   41c654: ud2                                              mgcsweepbuf.go:130

Fix these problems by replacing tab characters with spaces and padding
the string before escaping it. After this, the file names are properly
aligned:

                   .          .   41c634: cmp    $0x200,%rdx                               mgcsweepbuf.go:130
                   .          .   41c63b: jae    41c64f <runtime.(*gcSweepBuf).pop+0x4f>   mgcsweepbuf.go:130
                   .          .   41c63d: mov    (%rax,%rdx,8),%rcx                        mgcsweepbuf.go:130
                   .          .   41c64f: callq  424800 <runtime.panicindex>               mgcsweepbuf.go:130
                   .          .   41c654: ud2                                              mgcsweepbuf.go:130

* Separate discontiguous assembly blocks

Currently, weblist's disassembled output for each line simply lists
all instructions that are marked with that line number. This leads to
confusing disassembly because a lot of things look like straight-line
control flow when they aren't. For example, index panics look like
they always happen:

   .          .   41c62c: test   %al,(%rax)
   .          .   41c62e: and    $0x1ff,%edx
   .          .   41c634: cmp    $0x200,%rdx
   .          .   41c63b: jae    41c64f <runtime.(*gcSweepBuf).pop+0x4f>
   .          .   41c63d: mov    (%rax,%rdx,8),%rcx
   .          .   41c64f: callq  424800 <runtime.panicindex>
   .          .   41c654: ud2

In reality, 41c64f is at the end of the function, but it looks like we
call it immediately after a successful index operation.

Fix this by adding a vertical ellipses to separate blocks of assembly
that have other instructions between them. With this change, the above
looks like:

   .          .   41c62c: test   %al,(%rax)
   .          .   41c62e: and    $0x1ff,%edx
   .          .   41c634: cmp    $0x200,%rdx
   .          .   41c63b: jae    41c64f <runtime.(*gcSweepBuf).pop+0x4f>
   .          .   41c63d: mov    (%rax,%rdx,8),%rcx
                       ⋮
   .          .   41c64f: callq  424800 <runtime.panicindex>
   .          .   41c654: ud2

Use a more regular mechanism to name sources during driver tests and
recognize the naming during fetching to avoid saving the test profiles
into $HOME/pprof.

Also move the https+insecure testing into fetch_test, to focus it on
fetching the profile.

This fixes #107

This change also includes:
 - Instead of printing and sorting based on the first value in the
 internal value slice, use the sample type user selected.
 - Use the unit and print numbers in human friendly version.
 - Add a flag '-update' to internal/driver/driver_test to update the
 golden files.

 TODO: apply to other tests that use other golden files.

* Recognize (again) https+insecure scheme for symbolization POSTs.

This reverts the revert of #111 relaxing the test to make it pass as the
issue reported in #111 is caused by unrelated #120.

Added a test, verified the test failed before the fix.

This fixes #94.

* Fix the staticcheck failure.

* `git ls-files -- '*.go' | xargs gofmt -s -w`

* driver: unexport InternalOptions

This was an exported method that returned an internal type, so it's
unlikely that anyone depends on its presence.

* internal/binutils: remove newline in error string

golint reported: error strings should not be capitalized or end with
punctuation or a newline

* internal/driver: s/buildId/buildID/ per golint

* internal/elfexec: remove punctuation in error string

golint reported: error strings should not be capitalized or end with
punctuation or a newline

* internal/graph: correct comment

Found with golint.

* internal/graph: add method comment

golint reported: exported method Edge.WeightValue should have comment
or be unexported

* internal/report: remove newline in error string

golint reported: error strings should not be capitalized or end with
punctuation or a newline

* *: remove unused code

Found with honnef.co/go/tools/cmd/unused:

	internal/binutils/disasm_test.go:137:8: const objdump is unused (U1000)
	internal/driver/driver_test.go:353:6: type testProfile is unused (U1000)
	internal/graph/graph.go:838:6: func countEdges is unused (U1000)
	profile/proto.go:148:6: func encodeStringOpt is unused (U1000)

* *: simply code

Found with honnef.co/go/tools/cmd/gosimple:

	internal/driver/commands.go:471:24: should omit comparison to bool constant, can be simplified to !b (S1002)
	internal/driver/driver.go:163:5: should omit comparison to bool constant, can be simplified to !trim (S1002)
	internal/driver/driver.go:168:5: should omit comparison to bool constant, can be simplified to !focus (S1002)
	internal/driver/driver.go:172:5: should omit comparison to bool constant, can be simplified to !tagfocus (S1002)
	internal/driver/driver.go:176:5: should omit comparison to bool constant, can be simplified to !hide (S1002)
	internal/graph/dotgraph.go:213:34: should use make(map[string][]*Tag) instead (S1019)
	internal/report/report.go:1061:3: should replace loop with label = append(label, rpt.options.ProfileLabels...) (S1011)
	profile/proto.go:157:5: should omit comparison to bool constant, can be simplified to !x (S1002)

* *: correct mistakes

Found with honnef.co/go/tools/cmd/staticcheck:

	driver/driver.go:280:20: infinite recursive call (SA5007)
	internal/driver/driver_focus.go:54:11: this value of err is never used (SA4006)
	profile/proto.go:74:32: x | 0 always equals x (SA4016)

* Add linters to .travis.yml

Added a test, verified the test failed before the fix.

This fixes #94.

There is a check to only honor the call_tree option when generating non-visual
reports, but it wasn't being checked in all appropriate places, causing a
mismatch that triggered a panic.

Skip TestSymbolizationPath (seems too Unix-specific).
Fix others with golden output to adjust for Windows file name syntax.

Previous loc information on assembly listing was being printed for
every line, while the intent was to print it only when it changes.

Also update the tests to expose and test that case, and remaster
other tests to match.

By default hide entries in the comment field that starts with #, and
add a "comments" command to show all comments.

Disassembly reports generated by pprof -disasm will now include line number
information as generated by objdump. This will make the generated assembly more
readable.

As part of this I've introduced a new assemblyInstruction struct. Previously
the code was reusing the graph.Node to represent assembly instructions but it
seems better to have a dedicated type for this.

Format numeric tag values using the value of the -unit flag.
Added a testcase for this behavior.

When generating callgrind format output, produce cost lines at
instruction granularity. This allows visualizers supporting the
callgrind format to display instruction-level profiling information.

We also need to provide the object file (ob=) in order for tools to find
the object file to disassemble when displaying assembly.

We opportunistically group cost lines corressponding to the same
function together, reducing the number of superfluous description lines.
Subposition compression (relative position numbering) is also used to
reduce the output size.

Provide native Go mocks for binutils to use during testing, instead of
relying on shell-script mocks of those tools.

Also update the build instructions to use go get